Certificate III in Motorcycle Mechanical Technology
|Campus||Contact your local GOTAFE campus on 1300 GOTAFE (468 233) for full details|
The AUR30816 Certificate III in Motorcycle Mechanical Technology is the recognised qualification to become a qualified Automotive Motorcycle Repair Technician.
This qualification reflects the role of individuals who perform a broad range of tasks on a variety of motorcycles in the automotive service and repair industry.
The AUR30816 Certificate III in Motorcycle Mechanical Technology prepares new employees or recognises and develops existing workers performing mechanical work in the automotive motorcycle service and repair industry.
This course is delivered as an apprenticeship. You will be enrolled into a current qualification.
The AUR30816 Certificate III in Motorcycle Mechanical Technology is designed for those wishing to further their knowledge and skills to seek employment in the Automotive Service and Repair industry.
Working in this industry can also be physically demanding. Applicants should consider their physical ability to complete the job role e.g. bending, lifting, manual handling etc.
After gaining the AUR30816 Certificate III in Motorcycle Mechanical Technology, you might wish to undertake further study in the qualifications:
- AUR40216 Certificate IV in Automotive Mechanical Diagnosis
- AUR40816 Certificate IV in Automotive Mechanical Overhauling or other relevant qualifications.
It is important that students commit to all course requirements, including study and assessments the student may need to complete outside their normal training sessions.
Attendance on campus is required throughout the duration of the apprenticeship. Students will be advised of these dates upon enrolment. Majority of the learning is on-the-job under the supervision of the employer/workplace supervisor.
The course duration is up to 4 years.
Name: Brett Ambrosio
Location: Wangaratta and Shepparton
|Type||Average Enrolled Hours||Hourly Fee Rate||Indicative Tuition Fee||Hourly Govt Subsidy Rate||Total Govt Contribution|
|Govt Subsidised-Apprentice Concession||1,015||$0.62||$629.30||$15.00||$15,225.00|
The student tuition fees as published are subject to change given individual circumstances at enrolment.
You will receive an Indicative Fee Statement when you decide upon your course. A finalised invoice will be issued upon enrolment. Students will be invoiced for the components of the course that they are enrolled into for each year or semester.
Material fees cover costs associated with the following where applicable, and not limited to:
- Classroom activity consumables, handouts and booklets
- E-Learning resources and associated license access fees
Additionally some courses require students to purchase or supply text books, kits, tools, uniforms and personal protection equipment. Some specific materials may be purchased through the GOTAFE Book Shop. A full list with associated costs will be provided to you at your Course Information session or during the Pre-Training review Interview.
Training package entry requirements
There are no training package entry requirements for this qualification.
GOTAFE preferred entry requirements
Before being accepted into the course applicants must:
- Attend an interview
- Undertake a Pre-training Review to document previous work experience and qualifications and assess suitability for the course
- Complete a Core Skills Profile for Adults (CSPA) test to ensure the required language, literacy and numeracy levels are met for the course
- Register with the Australian Apprenticeship Support Network
AUR30816 – Core Units
AURTTA018 – Carry out diagnostic procedures
AURETR029 – Diagnose and repair charging systems
AURTTC003 – Diagnose and repair cooling systems
AURETR031 – Diagnose and repair ignition systems
AURJTB001 – Diagnose and repair motorcycle braking systems
AURJTX001 – Diagnose and repair motorcycle clutch systems
AURJTQ002 – Diagnose and repair motorcycle driveline systems
AURJTE001 – Diagnose and repair motorcycle engines
AURJTX002 – Diagnose and repair motorcycle manual transmissions
AURJTD004 – Diagnose and repair motorcycle steering systems
AURJTD003 – Diagnose and repair motorcycle suspension systems
AURTTF006 – Diagnose and repair petrol carburettor systems
AURETR023 – Diagnose and repair spark ignition engine management systems
AURETR030 – Diagnose and repair starting systems
AURAEA002 – Follow environmental and sustainability best practice in an automotive workplace
AURASA002 – Follow safe working practices in an automotive workplace
AURTTB001 – Inspect and service braking systems
AURTTQ003 – Inspect and service drive shafts
AURTTE004 – Inspect and service engines
AURTTQ001 – Inspect and service final drive assemblies
AURTTF001 – Inspect and service petrol fuel systems
AURETR012 – Test and repair basic electrical circuits
AURETR025 – Test, charge and replace batteries and jump-start vehicles
AURTTK002 – Use and maintain tools and equipment in an automotive workplace
AUR30816 – Elective Units
AURAFA003 – Communicate effectively in an automotive workplace
AURETR022 – Diagnose and repair vehicle dynamic control systems
AURETR032 – Diagnose and repair automotive electrical systems
AURJTJ001 – Remove, inspect and refit motorcycle wheel and tyre assemblies
AURJTJ002 – Remove, inspect, repair and refit motorcycle tyres and tubes
AURJTX003 – Diagnose and repair motorcycle automatic transmissions
AURLTD004 – Diagnose and repair light vehicle steering systems
AURLTJ002 – Remove, inspect, repair and refit light vehicle tyres and tubes
AURLTQ001 – Diagnose and repair light vehicle final drive assemblies
AURLTZ001 – Diagnose and repair light vehicle emission control systems
AURSCA006 – Promote automotive products and services
AURTTA004 – Carry out servicing operations
AURTTA005 – Select and use bearings, seals, gaskets, sealants and adhesives
AURTTA017 – Carry out vehicle safety inspections
AURTTC001 – Inspect and service cooling systems
AURTTF002 – Inspect and service diesel fuel injection systems
AURTTF005 – Diagnose and repair engine forced-induction systems
AURTTJ001 – Balance wheels and tyres
AURTTK001 – Use and maintain measuring equipment in an automotive workplace
AURTTZ002 – Diagnose and repair exhaust systems
AURVTW003 – Carry out advanced gas metal arc welding on vehicle body sections
AURVTW008 – Carry out oxyacetylene welding, thermal heating and cutting
AURVTW009 – Carry out basic gas metal arc welding
AURVTW018 – Carry out oxyacetylene welding, thermal heating and cutting
Specific types of assessments may include the following:
- Knowledge tests
- Work observation evidence
- Online Assessments
Skills Recognition is an assessment only process that may result in credits towards a part or full qualification. There is no formal training involved, although you may choose to complete further training as a result of the assessment process.
You can apply for Skills Recognition before you enrol in the qualification you are seeking. You can apply for Skills Recognition through one or both of the following processes:
- Credit Transfer for formal training that might be equivalent to a new qualification or partial qualification
- Recognition of Prior Learning (RPL) for people who have relevant and current skills and knowledge that they have gained through non-formal or informal learning i.e. work or life experience.
For further information regarding this course please call 1300 468 233.
Please note: Eligible individuals who wish to access a government subsidised place, must participate in a Pre-training Review. This will consider your:
- Aspirations/career goals
- Educational attainment and capability
- Literacy and numeracy skills
- Suitability for Recognition for Prior Learning (RPL) and Credit Transfer
Enrolment in an apprenticeship course is commenced after GOTAFE receives a Training Contract completed at an Australian Apprenticeship Support Network (AASN). To locate an AASN, please go to australianapprenticeships.gov.au or call 13 38 73.
Refer to the Student Handbook for information regarding Learner’s Rights Student Handbook.
Further information is provided at course induction.
As an enrolled student at GOTAFE you will be welcome to access a variety of non-academic support services from the Student Welfare Unit. These services are designed to best support you to successfully complete your course.
Services include on campus supports and remote supports
- employment information
- activities etc.
As an enrolled student at GOTAFE you may access a wide range of academic support services to assist you to meet the academic challenges of your course from our Learning Support Unit.
If you need any further clarification of the information provided please contact one of our client service officers on 1300 468 233 who can assist you or click Enquire Now.